• Course Name
  • MEM40311 Certificate IV Advanced Jewellery Manufacture_RPL
  • RII50115 Diploma Surface Operations Management_MINRES_AUS20
  • RII30815 Certificate III Civil Construction Plant Operations (MINRES)
  • RII40115 Certificate IV Surface Extraction Operations (QLD)
  • RII30815 Certificate III Civil Construction Plant Operations
  • MEM30619 Certificate III Jewellery Manufacture_RPL
  • RII50115 Diploma Surface Operations Management_RPL
  • RII40115 Certificate IV Surface Extraction Operations_RPL
  • MEM30619 - Jewellery Manufacture - JTS
  • TAESS00015 - Enterprise Trainer and Assessor Skill Set
  • MEM60211 Advanced Diploma Jewellery and Object Design
  • NWP30219 Certificate III Water Industry Operations
  • Guarding & Isolation (Webinar Only)
  • Guarding & Isolation (Onsite Workshop)
  • RII50315 Diploma Minerals Processing_RPL
  • RII50215 Diploma Underground Metalliferous Mining Management _RPL
  • RII30115 Certificate III Surface Extraction Operations (MINRES)
  • BSB51918 Diploma Leadership and Management (MINRES)
  • RII30115 Certificate III Surface Extraction Operations (TCM)
  • Standard 11 (TCM)
  • HLTAID001 Provide Cardiopulmonary Resuscitation
  • Supervisor Course (S1, 2, 3)
  • Standard 11 (MINRES)
  • RII50115 Diploma Surface Operations Management
  • RII40115 Certificate IV Surface Extraction Operations (NSW)
  • White Card (AT)
  • Problem Solving and Decision Making (CPD)
  • RII40120 Certificate IV Surface Extraction Operations (QLD)
  • RII40120 Certificate IV Surface Extraction Operations (NSW)
  • RII50120 Diploma Surface Operations Management (QLD)
  • RII50120 Diploma Surface Operations Management (NSW)
  • RII40120 Certificate IV Surface Extraction Operations (SA)
  • RII50120 Diploma Surface Operations Management (SA)
  • BSB50420 Diploma of Leadership and Management (QLD)
  • BSB30120 Certificate III in Business (QLD)
  • BSB30120 Certificate III in Business (NSW)
  • BSB50420 Diploma of Leadership and Management (NSW)
  • BSB30120 Certificate III in Business (SA)
  • Supervisor Course (S123) (TCM)
  • RII50120 Diploma Surface Operations Management (RPL)
  • CAT (Off Highway Trucks)
  • Trainer and Assessor Skill Set
  • Implement Traffic Management Plans
  • Gambaro Performance Review
  • RII40120 Certificate IV Surface Extraction Operations (RPL)
  • MEM50311 Diploma of Jewellery and Object Design (RPL)
  • T123 - Tyre Fitting Short Course
  • FA-001 - First Aid Course (AT)
  • BSB41419 Certificate IV Work Health and Safety (RPL)
  • G2 - G2 Risk Management
  • RIISAM212E Service mine plant and equipment
  • Standard 11
  • QM1 Webinar
  • Location Name
  • BRISBANE
  • FERNY HILLS
  • MinRes Training Room
 
 

Selected Courses

 
Course Title
Start Date
End Date
State
Spaces
MEM40311 Certificate IV Advanced Jewellery Manufacture_RPL
QLD
0
MEM40311
MEM40311_RPL_AUS20
QLD

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Certificate IV in Advanced Jewellery Manufacture.

RII50115 Diploma Surface Operations Management_MINRES_AUS20
Various
0
RII50115
RII50115_MINRES_AUS20
Various

RII50115 Diploma of Surface Operations Management - (TAE-HB/AUS)

Enrol with MINRES Training Instituteto meet NEW Legislative requirements before the deadline.

Participants who enrol in this course should be working in the Mining and Quarrying Industry as a Site Senior Executive or Supervisor as described HERE.

Please ask one of our friendly staff for more information if you have any questions by phoning 1800 MINRES for more information.

Qualification Description

This qualification reflects the role of mine managers in an open cut coal or metalliferous mine or a quarry, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others.

They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

Please ask your trainer and assessor if this is the right path of enrolment.

There are no other entry requirements.

Packaging Rules

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

Total number of units = 13

2 core units plus

11 elective units , of which:

  • At least four (4) must be chosen from Group A
  • No more than five (5) may be chosen from Group B
  • Up to two (2) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.

RII30815 Certificate III Civil Construction Plant Operations (MINRES)
QLD
0
RII30815
RII30815_MINRES_AUS20
QLD

Certificate III in Civil Construction Plant Operations (TAE/DP)

The Certificate III in Civil Construction Plant Operations specifies the competencies required for employment as a skilled operator working with civil construction plant, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.

While there are no formal entry requirements for this qualification, for an apprentice pathway the learner must be employed full time or part time and have access to a workplace to be able to gain sufficient experience to successfully complete the Unit of Competency requirements.

People entering the workforce to undertake an Apprenticeship in the construction sector, they may have minimal or some prior skills or Statements of Attainment which may be recognised through our recognition process. Delivered through SRTO requirements including development of a Training Plan, Employer Resource Assessment and completion of a Training Record.

RII40115 Certificate IV Surface Extraction Operations (QLD)
QLD
0
RII40115
RII40115_QLD21
QLD
BRISBANE

RII40115 Certificate IV in Surface Extraction Operations (TAE-DP/QLD)

Enrol with MINRES Training Institute to meet NEW Legislative requirements before the deadline.

Participants who enrol in this course should be working in the Mining and Quarrying Industry as a Site Senior Executive or Supervisor as described HERE .

Please ask one of our friendly staff for more information if you have any questions by phoning 1800 MINRES for more information.

Qualification Description

This qualification reflects the role of mine managers in an open cut coal or metalliferous mine or a quarry, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others.

They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

Participants who enrol in this course should be employed in a statutory position as per Department of Natural Resources and Mines Guidelines OR as an alternate for the abovementioned position description.

There are no other entry requirements.

RII30815 Certificate III Civil Construction Plant Operations
QLD
0
RII30815
RII30815_TCM_AUS20
QLD

RII30815 Certificate III in Civil Construction Plant Operations

Qualification Description

This qualification reflects the role of a skilled operator working with civil construction plant, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.

Licensing/Regulatory Information

Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to the application of the qualification.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 19

14 core units, plus

5 elective units, of which:

  • At least one (1) must be chosen from Group A
  • At least two (2) must be chosen from Group B
  • No more than two (2) may be chosen from Group C
  • No more than one (1) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
MEM30619 Certificate III Jewellery Manufacture_RPL
QLD
0
MEM30619
MEM30619_RPL_AUS20
QLD
FERNY HILLS

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Certificate III in Jewellery Manufacture.

RII50115 Diploma Surface Operations Management_RPL
QLD
0
RII50115
RII50115_RPL_AUS20
QLD

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Diploma of Surface Operations Management which will meet the requirements for the Mining Safety and Health Advisory Committee, enabling you to make application for your SSE notice. You also have the option to choose G2 as an elective.

RII40115 Certificate IV Surface Extraction Operations_RPL
Various
0
RII40115
RII40115_RPL_AUS20
Various

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Certificate IV in Surface Extraction Operations.

MEM30619 - Jewellery Manufacture - JTS
Various
0
MEM30619
MEM30619_JTS
Various

Jewellery Training Solutions (JTS) - RPL

This course is for students undertaking apprenticeships training via the Jewellery Training Solutions (JTS) online training platform at a silver level or above.

Recognition of Prior Learning (RPL) is for persons with extensive skills and knowledge from the Metals Engineering and Manufacturing sector, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others. They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

Suitable candidates may be people who have been performing the role of Manufacturing Jeweller in a studio or workshop environment.

For more information, please don't hesitate to contact MINRES Training Institute on 1800MINRES.

TAESS00015 - Enterprise Trainer and Assessor Skill Set
QLD
0
TAESS00015
TAE_DP
QLD
MinRes Training Room

Enterprise Trainer and Assessor Skill Set - */* * 2019

This course offers the skills and knowledge required to deliver non-accredited training. It is also relevant for those requiring to deliver and assess nationally endorsed training in your workplace.

The units are:

  • TAEASS401 Plan assessment activities and processes
  • TAEASS402 Assess competence
  • TAEASS403 Participate in assessment validation
  • TAEDEL301 Provide work skill instruction

THIS IS AN ONLINE COURSE. YOU WILL NEED A COMPUTER TO PARTICIPATE.

THE USE OF A KEYBOARD AND MOUSE IS ADVISABLE.

MEM60211 Advanced Diploma Jewellery and Object Design
Various
0
MEM60211
MEM60211_RPL_AUS20
Various

MEM60211 Advanced Diploma of Jewellery and Object Design

Qualification Checklist

This qualification describes the skills and knowledge required to develop jewellery and object design solutions that require a wide range of specialised technical and creative skills. Design solutions reflect consideration of aesthetics, function, production techniques, material characteristics, and marketability of jewellery and objects.

This qualification targets independent professional designs or designers/practitioners in jewellery and objects. Designs may meet a specific client brief and reflect original design concepts. This person is likely to be an owner/operator or employed in a production workshop or all business operation and working directly with clients to produce items.

This qualification is typically used to develop skills and knowledge in jeweller and object design enterprises. Skills gained from this qualification may be applied to specialist jewellery and object design briefs, including heritage jewellery, theatre and film commissions, exhibitions and churchware, as well as one-off individual client briefs.

Licensing/Regulatory Requirements

There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, all work must comply with occupational health and safety (OHS) and environmental regulation and legislation that apply to the workplace.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 36

9 core units; plus

27 elective units, of which:

  • At least five (5) units of competency from Group A
  • At least three (3) units of competency from Group B
  • At least three (3) units of competency from Group C
  • At least three (3) units of competency from Group D

The thirteen (13) remaining elective units can be selected as follows:

  • Group A, B, C or D electives not previously selected
  • A maximum of five (5) units from Group E
  • Up to six (6) appropriate elective units may be chosen from other endorsed Training Packages and accredited courses where those units are available in an Advanced Diploma, Diploma (maximum 4 units) or Certificate IV (maximum 4 units) qualification.
NWP30219 Certificate III Water Industry Operations
QLD
0
NWP30219
NWP30219
QLD
Guarding & Isolation (Webinar Only)
Various
0
S107
GI_MINRES_AUS21
Various
FERNY HILLS

Guarding and Isolation - Webinar Only

If you're passionate about safety, then you can't miss this opportunity to ensure that everyone on your mine or quarry site is protected from the risk of harm presented by unguarded or live equipment or machinery.

This half-day short course is designed to ensure ALL persons on a mine or quarry site understand key requirements and obligation for effective equipment and machinery guarding and isolation.

What you will get from this short course:

  • Develop an understanding of the principles, processes, practices and legal compliance requirements for machinery and equipment, guarding and isolation
  • Practical application of this knowledge through a site-based workshop
Guarding & Isolation (Onsite Workshop)
0
S107
GISite_MINRES_AUS21

Guarding and Isolation - Onsite Workshop

This half-day onsite workshop is an optional exercise that you can choose to undertake on your site with your team. MINRES has designed a site-based workshop to confirm knowledge, develop new skills, confirm compliance with current standards and most importantly, ensure the safety of personnel on your site. At the end of the webinar, you will be given the opportunity to opt into this feature.

NB: Part 4 Site-based Workshop is an additional service and is not included in the webinar.

RII50315 Diploma Minerals Processing_RPL
Various
0
RII50315
RII50315_RPL_AUS20
Various

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Diploma of Minerals Processing.

RII50215 Diploma Underground Metalliferous Mining Management _RPL
QLD
0
RII50215
RII50215_RPL_AUS20
QLD

Please download the RPL Kit provided and complete as per the instructions inside the document.

You will be required to upload ALL evidence in a SINGLE .zip file for assessment by the assigned Trainer and Assessor.

Upon successful completion of the course, you will be eligible for a Diploma of Underground Metalliferous Mining Management.

RII30115 Certificate III Surface Extraction Operations (MINRES)
QLD
417
RII30115
RII30115_MINRES_AUS20
QLD
417
BSB51918 Diploma Leadership and Management (MINRES)
QLD
0
BSB51918
BSB51918_MINRES_AUS20
QLD

BSB51918 Diploma of Leadership and Management

Qualification Description

This qualification reflects the role of individuals who apply knowledge, practical skills and experience in leadership and management across a range of enterprise and industry contexts.

Individuals at this level display initiative and judgement in planning, organising, implementing and monitoring their own workload and the workload of others. They use communication skills to support individuals and team to meet organisational or enterprise requirements.

They plan, design, apply and evaluate solutions to unpredictable problems, and identify, analyse and synthesise information from a variety of sources.

Licensing/Regulatory Information

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 12

4 core units, plus

8 elective units, of which:

  • 4 elective units must be selected from Group A
  • Up to 4 may be additional units from Group A or Group B
  • Up to 2 electives may be from Diploma or above in the Business Services Training Package
  • 1 elective unit may be chosen from any currently endorsed Training Package or accredited course at a Diploma level.

Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.

RII30115 Certificate III Surface Extraction Operations (TCM)
QLD
0
RII30115
RII30115_TCM_AUS20
QLD
Standard 11 (TCM)
QLD
0
RII20215
S11_TCM_AUS20
QLD
HLTAID001 Provide Cardiopulmonary Resuscitation
QLD
0
CPR-001
HLTAID001_MMST_AUS21
QLD

HLTAID001 Provide Cardiopulmonary Resuscitation

Course Description

This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

This unit applies to all workers who may be required to provide CPR, in a range of situations, including community and workplace settings.

Licensing/Regulatory Requirements

Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.

Entry Requirements

There are no entry requirements for this course.

Elements and Performance Criteria

  1. Respond to an emergency situation
  2. Perform CPR procedures
  3. Communicate details of the incident
Supervisor Course (S1, 2, 3)
QLD
77
RII30115
RII30115_S123
QLD
77
Standard 11 (MINRES)
QLD
0
RII20215
S11_MINRES_AUS20
QLD
RII50115 Diploma Surface Operations Management
QLD
0
RII50115
G2_Risk
QLD

RII50115 Diploma of Surface Operations Management

Qualification Description

This qualification reflects the role of mine managers in an open-cut coal or metalliferous mine or a quarry, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others. They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

Licensing/Regulatory Information

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 13

2 core units, plus

11 elective units, of which:

  • At least four (4) must be chosen from Group A
  • No more than five (5) may be chosen from Group B
  • Up to two (2) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
RII40115 Certificate IV Surface Extraction Operations (NSW)
NSW
0
RII40115
RII40115_NSW21
NSW

RII40115 Certificate IV in Surface Extraction Operations

Qualification Description

This qualification reflects the role of employees such as a supervisor or team leader working in an open-cut mine or quarry. They perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others, contribute to the development of technical solutions to non-routine problems and apply safety management plans to the workplace.

Licensing/Regulatory Information

Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories and industry sectors. Relevant information must be sourced prior to the application of the qualification.

Entry Requirments

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 13

4 core units, plus

9 elective units, of which:

  • One (1) must be chosen from Group A
  • At least two (2) must be chosen from Group B
  • No more than four (4) may be chosen from Group C
  • No more than one (1) may be chosen from Group D
  • No more than two (2) may be chosen from elsewhere within this training package, or from antoehr endorsed training package, or from an accredited course.
White Card (AT)
QLD
0
CI-001
CPCCWHS1001_AT
QLD
HLTAID001 Provide Cardiopulmonary Resuscitation
QLD
0
CPR-001
HLTAID001_TCM
QLD

HLTAID001 Provide Cardiopulmonary Resuscitation

Course Description

This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

This unit applies to all workers who may be required to provide CPR, in a range of situations, including community and workplace settings.

Licensing/Regulatory Requirements

Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.

Entry Requirements

There are no entry requirements for this course.

Elements and Performance Criteria

  1. Respond to an emergency situation
  2. Perform CPR procedures
  3. Communicate details of the incident
RII30815 Certificate III Civil Construction Plant Operations
QLD
0
RII30815
RII30815_TRAINEES_AUS21
QLD

RII30815 Certificate III in Civil Construction Plant Operations

Qualification Description

This qualification reflects the role of a skilled operator working with civil construction plant, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.

Licensing/Regulatory Information

Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to the application of the qualification.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

Total number of units = 19

14 core units, plus

5 elective units, of which:

  • At least one (1) must be chosen from Group A
  • At least two (2) must be chosen from Group B
  • No more than two (2) may be chosen from Group C
  • No more than one (1) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
Problem Solving and Decision Making (CPD)
0
CPD
CPD_PSDM
RII40120 Certificate IV Surface Extraction Operations (QLD)
QLD
92
RII40120
RII40120_QLD21
QLD
92
RII40120 Certificate IV Surface Extraction Operations (NSW)
NSW
82
RII40120
RII40120_NSW21
NSW
82
RII50120 Diploma Surface Operations Management (QLD)
QLD
92
RII50120
RII50120_QLD21
QLD
92
RII50120 Diploma Surface Operations Management (NSW)
NSW
96
RII50120
RII50120_NSW21
NSW
96
RII40120 Certificate IV Surface Extraction Operations (SA)
SA
100
RII40120
RII40120_SA21
SA
100
RII50120 Diploma Surface Operations Management (SA)
SA
100
RII50120
RII50120_SA21
SA
100
BSB50420 Diploma of Leadership and Management (QLD)
QLD
76
BSB50420
BSB50420_QLD
QLD
76

The course offers the skills and knowledge required to apply knowledge, practical skills and experience in leadership and management across a range of enterprise and industry contexts. Participants undertaking this course display initiative and judgement in planning, organising, implementing and monitoring their own workload and the workload of others. They use communication skills to support individuals and teams to meet organisational or enterprise requirements. Participants will also plan, design, apply and evaluate solutions to unpredictable problems and identify, analyse and synthesise information from a variety of sources.

BSB30120 Certificate III in Business (QLD)
QLD
0
BSB30120
BSB30120_QLD
QLD
BSB30120 Certificate III in Business (NSW)
NSW
0
BSB30120
BSB30120_NSW
NSW
BSB50420 Diploma of Leadership and Management (NSW)
NSW
0
BSB50420
BSB50420_NSW
NSW
BSB30120 Certificate III in Business (SA)
SA
0
BSB30120
BSB30120_SA
SA
Supervisor Course (S123) (TCM)
QLD
0
RII30115
RII30115_S123_TCM
QLD
RII50120 Diploma Surface Operations Management (RPL)
Various
0
RII50120
RII50120_RPL
Various
CAT (Off Highway Trucks)
QLD
0
CAT-OHT
CAT (OHT)
QLD
Trainer and Assessor Skill Set
Various
0
RII40115
TAE_SS
Various
Implement Traffic Management Plans
QLD
0
NWP30219
Traffic Management
QLD
Gambaro Performance Review
0
GPR01
GPR01
RII40120 Certificate IV Surface Extraction Operations (RPL)
Various
0
RII40120
RII40120_RPL
Various
MEM50311 Diploma of Jewellery and Object Design (RPL)
Various
0
MEM50311
MEM50311_RPL
Various
T123 - Tyre Fitting Short Course
QLD
95
T123
T123
QLD
95
FA-001 - First Aid Course (AT)
QLD
100
FA-001
FA-001 (AT)
QLD
100
BSB41419 Certificate IV Work Health and Safety (RPL)
QLD
100
BSB41419
BSB41419_RPL
QLD
100
G2 - G2 Risk Management
QLD
98
G2
G2
QLD
98
RIISAM212E Service mine plant and equipment
QLD
99
RII20220
RIISAM212E
QLD
99
Supervisor Course (S1, 2, 3)
QLD
99
RII30120
RII30120_S123
QLD
99
Standard 11
QLD
100
RII20220
S11_NEW
QLD
100
QM1 Webinar
December 2, 2021 8:00 am
December 3, 2021 4:00 pm
Various
13
RII50120
QMW1_03122021
December 2, 2021 8:00 am
December 3, 2021 4:00 pm
Various
13