Quarry Managers Workshop

DON'T RISK FINES OR SUSPENSION OF OPERATIONS! UPDATE YOUR QUALIFICATIONS BEFORE 9 NOVEMBER 2019.

ENROL TODAY!

With recent changes to the legislation, "Site Senior Executives (SSEs) at a Mineral Mine or Quarry with more than 10 workers are now required to have a Site Senior Executive Notice by 9 November 2019, to confirm they have the competencies required by the Mining Safety and Health Advisory Committee."

QM1 Workshop

Attend our tailored two-day QM1 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIIRIS501D Implement and Maintain Management Systems to Control Risk

This units is designed to offer the skills and knowledge required to implement and maintain management systems to control risk in the Resources and Infrastructure Industries. This unit is appropriate for those working in a management role.

BSBWHS501 Ensure a Safe Workplace

This unit offers the skills and knowledge required to establish, maintain and evaluate the organisation's work health and safety (WHS) policies, procedures and programs in the relevant work area, according to WHS legislative requirements. It takes a systems approach and addresses compliance with relevant legislative requirements. This unit applies to managers working in a range of contexts who have, or are likely to have responsibility for WHS as part of their broader management role. It is relevant for people with obligations under WHS legislation.

What You'll Leave With

  • Nationally Recognised Statement of Attainment

QM2 Workshop

Attend our tailored two-day QM2 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIIGOV501D Identify, Implement and Maintain Legal Compliance Requirements

This unit offers the skills and knowledge required to identify, implement and maintain legal compliance in the Resources and Infrastructure Industries. This unit is appropriate for those working in supervisory or legal compliance management roles.

RIIMPO502D Manage Interaction of Heavy and Light Vehicles and Mining Equipment

This unit offers the skills and knowledge required to manage the interaction of heavy and light vehicles and mining equipment in Coal and Metalliferous Mining and Extraction.

What You'll Leave With

  • Nationally Recognised Statement of Attainment

QM3 Workshop

Attend our tailored two-day QM3 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIIERR503D Implement emergency preparedness and response systems

This offers the skills and knowledge required to implement emergency preparedness and response systems. This unit is appropriate for those working in management roles.

RIIERR504D Manage major incidents and emergencies

This units offers the skills and knowledge required to manage major incidents and emergencies. This unit is appropriate for those working in management roles.

RIIERR601D Establish and maintain mine emergency preparedness and response systems

This unit offers the skills and knowledge required to establish and maintain mine emergency preparedness and response systems. This unit is appropriate for those working in management roles.

What You'll Leave With

  • Nationally Recognised Statement of Attainment

QM4 Workshop

Attend our tailored two-day QM4 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIIPRO501D Implement site processing plant operations

This unit develops the skills and knowledge required to implement site processing plant operations. This unit is appropriate for those working in management or technical specialist roles.

RIIRAI502D Develop and implement site plant and resource management plan

This unit offers the skills and knowledge required to develop and implement a site plant and resource management plan. It is appropriate for those working in management or technical specialist roles.

BSBMGT516 Facilitate continuous improvement

This unit offers the skills and knowledge required to lead and manage continuous improvement systems and processes. It is built around the development of systems and the analysis of information to monitor and adjust performance strategies and to manage the opportunities for further improvements. This unit is appropriate for those who actively manage a continuous improvement process in order to achieve an organisation's objectives. Work will normally be completed using complex and diverse methods and procedures that will require considerable discretion and judgement, using a range of problem-solving and decision-making strategies.

What You'll Leave With

  • Nationally Recognised Statement of Attainment

QM5 Workshop

Attend our tailored two-day QM5 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIICCR501D Conduct sales in construction materials operations

This unit offers the skills and knowledge required to conduct sales in construction materials operations. This unit is appropriate for those working in supervisory or management roles.

RIIPRM501D Implement, monitor, rectify and report on contracts

This unit offers the skills and knowledge required to implement, monitor, rectify and report on contracts. It is appropriate for those working in a supervisory or management role.

BSBPMG522 Undertake project work

This unit offers the skills and knowledge required to undertake a straightforward project or a section of a larger project. It covers developing a project plan, administering and monitoring the project, finalising the project and reviewing the project to identify lessons learned for application to future projects. This unit applies to those who play a significant role in ensuring a project meets timelines, quality standards, budgetary limits and other requirements set for the project.

What You'll Leave With

  • Nationally Recognised Statement of Attainment

QM7 Workshop

Attend our tailored two-day QM7 Workshop presented by Hamish Beattie and leave with the following units of competency:

RIIENV501D Implement and maintain Environmental Management Plan

This unit offers the skills and knowledge required to implement and maintain an environmental management plan.

RIIENV502D Undertake process or project Environmental Impact Assessment

This unit offers the skills and knowledge required to undertake process or project environmental impact assessment.

RIIWBP401D Apply and monitor site waste and by-products management plan

This unit offers the skills and knowledge required to apply and monitor site waste and by-products management plan.

What You'll Leave With

  • Nationally Recognised Statement of Attainment
Heavy mining industry worker

Have a question? Want more information?

Frequently Asked Questions
nrtlogo

↓ ENROL NOW ↓

 
  • Course Name
  • Diploma of Surface Operations Management (RPL Only)
  • RII50115 - Surface Operations Management
  • QM1 Workshop - Brisbane
  • QM2 Workshop - Brisbane
  • QM7 Workshop - Brisbane
  • Location Name
  • MinRes Training Room
 
 

Selected Courses

 
Course Title
Start Date
End Date
State
Spaces
Diploma of Surface Operations Management (RPL Only)
Various
RII50115
RII50115_RPL
Various

RII50115 Diploma of Surface Operations Management - RPL - (TAE-DP/AUS)

Enrol with MINRES Training Institute to meet NEW Legislative requirements before the deadline.

Participants who enrol in this course should be working in the Mining and Quarrying Industry as a Site Senior Executive or Supervisor as described HERE .

Please ask one of our friendly staff for more information if you have any questions by phoning 1800 MINRES for more information.

Qualification Description

This qualification reflects the role of mine managers in an open cut coal or metalliferous mine or a quarry, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others.

They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

Participants who enrol in this course should be employed in a statutory position as per Department of Natural Resources and Mines Guidelines OR as an alternate for the abovementioned position description.

There are no other entry requirements.

Introduction

This Recognition of Prior Learning (RPL) Candidate Assessment Kit is for persons with extensive skills and knowledge from the Resource and Infrastructure Industries (RII) who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others. They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

Suitable candidates may be people who have been performing the role of Site Senior Executive (SSE) in a quarry, open cut coal or metalliferous mine.

The RPL Candidate Assessment Pathway will be:

  • Discussion with candidate to determine which units to make up the qualification within the packaging rules; and a brief understanding of their current and previous work background;
  • MinRes will then customise the Candidate's RPL Assessment Kit and provide this for completion;
  • MinRes will review the evidence provided against the criteria, performance evidence and knowledge evidence to identify any gaps - (there are three (3) sections required for full completion);
  • *Based on the review, where deemed necessary MinRes will hold with the candidate with a Competency Conversation (CC) with the candidate to complete any gaps identified after RPL Evidence Assessment is completed in full as described in the above steps.

A MinRes appointed Assessor will assess the evidence provided and any gap assessment completed by the candidate to make a fair and valid RPL assessment decision.

Instructions to Candidate

This RPL Candidate Assessment Kit has four (4) sections. The first three (3) sections listed below must all be completed by the candidate and submitted to their nominated Assessor:

1) Document/Evidence List

Complete the customised self-reflection evidence list of your documented evidence applicable to the performance and knowledge criteria for each Unit of Competency (UoC) in the qualification. You will notice that some documents may apply to several UoC's.

2) Self-Reflection Evidence Table

This table describes the criteria required and may have examples of the types of evidence that you can submit. Choose the units of competence in accordance with the packaging rules. A direct Credit Transfer may be granted where you have statements of attainment for the required unit or for equivalent units. You must show currency for these units where the statements were issued more than two (2) years ago.

RPL - Decide what evidence you have to demonstrate these criteria and record in the Self-Reflection Evidence Support column. Record the document number from the document list in the reference document column. Provide at least one (1) document per criteria of demonstrated experience and evidence required/suggested.

3) Project

The project will provide direct evidence of your skills and knowledge for this qualification. Candidates must submit this project in a report format with suitable headings.

4) Competency Conversation (CC)*

Having gathered the evidence accessible to you, you will meet with your Assessor, in person or via telephone, etc. This meeting is often called a 'Competency Conversation' (CC) or a 'Professional Conversation'. The conversation is conducted by the Assessor with questions prepared by them in advance. The conversation is intended to help you recall examples of your relevant knowledge and skills. Your Assessor will note your responses to questions to gather enough evidence to enable a judgement to be made. You may be asked to give detailed answers to demonstrate your knowledge. If you provide photos, for example, they may be used to stimulate conversation. This will give you the opportunity to discuss your own work, giving the Assessor an idea of the range of equipment you use, safety precautions you take and the environmental factors you deal with.

RII50115 - Surface Operations Management
Various
RII50115
RII50115
Various

RII50115 Diploma of Surface Operations Management - (TAE-DP/AUS)

Enrol with MINRES Training Instituteto meet NEW Legislative requirements before the deadline.

Participants who enrol in this course should be working in the Mining and Quarrying Industry as a Site Senior Executive or Supervisor as described HERE.

Please ask one of our friendly staff for more information if you have any questions by phoning 1800 MINRES for more information.

Qualification Description

This qualification reflects the role of mine managers in an open cut coal or metalliferous mine or a quarry, who perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment, roles and techniques for themselves and others.

They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning skills and implement safety management plans.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

Please ask your trainer and assessor if this is the right path of enrolment.

There are no other entry requirements.

Packaging Rules

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

Total number of units = 13

2 core units plus

11 elective units , of which:

  • At least four (4) must be chosen from Group A
  • No more than five (5) may be chosen from Group B
  • Up to two (2) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.

QM1 Workshop - Brisbane
October 29, 2019 7:30 am
October 30, 2019 4:30 pm
QLD
25
RII50115
QMW_36
October 29, 2019 7:30 am
October 30, 2019 4:30 pm
QLD
25
MinRes Training Room

Quarry Managers 1 Workshop - Brisbane - 29/30 October 2019

Attend our tailored two-day seminar presented by Hamish Beattie and leave with:

  • RIIRIS501D Implement and maintain management systems to control risk
  • BSBWHS501 Ensure a safe workplace

Upon successful completion, you will receive a Nationally Recognised Statement of Attainment and Credit Transfers towards your Diploma of Surface Operations Management (RII50115).

QM2 Workshop - Brisbane
November 4, 2019 7:30 am
November 5, 2019 4:30 pm
QLD
24
RII50115
QMW_37
November 4, 2019 7:30 am
November 5, 2019 4:30 pm
QLD
24
MinRes Training Room

Quarry Managers 2 Workshop - Brisbane - 4/5 November 2019

Attend our tailored two-day seminar presented by Hamish Beattie and leave with:

  • RIIGOV501D Identify, implement and maintain legal compliance requirements
  • RIIMPO502D Manage interaction of heavy and light vehicles and mining equipment

Upon successful completion, you will receive a Nationally Recognised Statement of Attainment and Credit Transfers towards your Diploma of Surface Operations Management (RII50115).

QM2 Workshop - Brisbane
December 2, 2019 7:30 am
December 3, 2019 4:30 pm
QLD
25
RII50115
QMW_41
December 2, 2019 7:30 am
December 3, 2019 4:30 pm
QLD
25
MinRes Training Room

Quarry Managers 2 Workshop - Brisbane - 2/3 December 2019

Attend our tailored two-day seminar presented by Hamish Beattie and leave with:

  • RIIGOV501D Identify, implement and maintain legal compliance requirements
  • RIIMPO502D Manage interaction of heavy and light vehicles and mining equipment

Upon successful completion, you will receive a Nationally Recognised Statement of Attainment and Credit Transfers towards your Diploma of Surface Operations Management (RII50115).

QM7 Workshop - Brisbane
November 25, 2019 7:30 am
November 26, 2019 4:30 pm
QLD
21
RII50115
QMW_50
November 25, 2019 7:30 am
November 26, 2019 4:30 pm
QLD
21
MinRes Training Room

Quarry Managers 7 Workshop - Brisbane - 25/26 November 2019

MINRES Training Institute has put together a unique learning program in conjunction with Construction Skills Queensland to provide up skilling and cross skilling of participants within the Building and Construction Industry in Queensland for eligible persons.

The program will also provide funding to assist eligible persons, apprentices and trainees during their apprenticeship or traineeship and in the first year following completion of their apprenticeship or traineeship to undertake further skills training, to assist them to be competitive in the market and gain licences essential to their future work.

Construction Skills Queensland (CSQ) will provide funding to MINRES Training Institute, to provide training and assessment services for a specific range of short courses for eligible participants.The funding provided by CSQ is a contribution towards the cost of providing these services and aims to reduce he cost of the services to participants.

Attend our tailored two-day seminar and leave with:

  • RIIENV501D Implement and maintain environmental management plan
  • RIIENV502D Undertake process or project environmental impact assessment
  • RIIWBP401D Apply and monitor site waste and by-products management plan